Home /

for TE 1-480699-0 alternatives 6.35mm Pitch female connector Wire To Wire

Send your message to this supplier
*From:
Your email address is incorrect!
To:RULETEAM CONNECTION TECHNOLOGY (SHENZHEN) CO.,LTD
*Subject:
Your subject must be between 10-255 characters!
*Message:
Your message must be between 20-3,000 characters!
Yes!I would like your verified suppliers matching service!
Buy cheap for TE 1-480699-0 alternatives 6.35mm Pitch female connector Wire To Wire Connectors from wholesalers
  • Buy cheap for TE 1-480699-0 alternatives 6.35mm Pitch female connector Wire To Wire Connectors from wholesalers
  • Buy cheap for TE 1-480699-0 alternatives 6.35mm Pitch female connector Wire To Wire Connectors from wholesalers
  • Buy cheap for TE 1-480699-0 alternatives 6.35mm Pitch female connector Wire To Wire Connectors from wholesalers
  • Buy cheap for TE 1-480699-0 alternatives 6.35mm Pitch female connector Wire To Wire Connectors from wholesalers
  • Buy cheap for TE 1-480699-0 alternatives 6.35mm Pitch female connector Wire To Wire Connectors from wholesalers
  • Buy cheap for TE 1-480699-0 alternatives 6.35mm Pitch female connector Wire To Wire Connectors from wholesalers
  • Buy cheap for TE 1-480699-0 alternatives 6.35mm Pitch female connector Wire To Wire Connectors from wholesalers
  • Buy cheap for TE 1-480699-0 alternatives 6.35mm Pitch female connector Wire To Wire Connectors from wholesalers
  • Buy cheap for TE 1-480699-0 alternatives 6.35mm Pitch female connector Wire To Wire Connectors from wholesalers
  • Buy cheap for TE 1-480699-0 alternatives 6.35mm Pitch female connector Wire To Wire Connectors from wholesalers
  • Buy cheap for TE 1-480699-0 alternatives 6.35mm Pitch female connector Wire To Wire Connectors from wholesalers
  • Buy cheap for TE 1-480699-0 alternatives 6.35mm Pitch female connector Wire To Wire Connectors from wholesalers
  • Buy cheap for TE 1-480699-0 alternatives 6.35mm Pitch female connector Wire To Wire Connectors from wholesalers
  • Buy cheap for TE 1-480699-0 alternatives 6.35mm Pitch female connector Wire To Wire Connectors from wholesalers
  • Buy cheap for TE 1-480699-0 alternatives 6.35mm Pitch female connector Wire To Wire Connectors from wholesalers
  • Buy cheap for TE 1-480699-0 alternatives 6.35mm Pitch female connector Wire To Wire Connectors from wholesalers
  • Buy cheap for TE 1-480699-0 alternatives 6.35mm Pitch female connector Wire To Wire Connectors from wholesalers

for TE 1-480699-0 alternatives 6.35mm Pitch female connector Wire To Wire Connectors

Ask Latest Price
Brand Name:HRT
Model Number:C6350HF-3X03P
Certification:ISO9001/ ISO14001/UL/RoHS/REACH
Price:Negotiated
Payment Terms:TT, Western Union, PayPal, L/C
Supply Ability:28 million pcs per month
Delivery Time:5 to 8 working days after payment checked
Company Data
Active Member
Contact Person Ricky Zou
Business Type: 86-139-25717990
Business Type: Manufacturer Exporter
Officials: No.A1507H2 Xinhe Century Building, 3069 Caitian Rd, Gangxia Community, Futian District, Shenzhen City, China
Quality: Quality Certifitation Available
Product Details Company Profile
Product Details

6.35mm Pitch Wire To Wire Connector Triple Row C6350HF A Type Lock Wire Housing


1, Detailed information of product feature

Basic dimension information
Pitch6.35mm
ColorWhite
RowTriple(3 rows)
BumpWithout
GenderMale
ApplicationPower, wire-to-wire
Wire rangeAWG20# to 14#
Wire insulation diameter3.30mm Max
Terminal materialsBrass material, tin-plated finish

Terminal Package

4000pcs/reel

Terminal processing method

E-stamping before tin-plated
Matched partC6350HM series triple row housing
Electrical properties
Current Rating15A AC, DC
Voltage Rating600V AC, DC
Contact Resistance3.5mΩ Max
Insulation Resistance1000mΩ min
Withstanding Voltage5000V AC/minute
Mechanical properties
Temperature range-25℃ to 85 ℃
Terminal Insertion Force2.30kgf (Max.)
Terminal/Housing Retention Force3.00kgf (Min.)
Pin Retention Force1.80kgf (Min.)
Latch Yield Strength16.0kgf (Min.)
Other information please kindly check the following picture.

2, Introduction for this series products

Please kindly notice that the C6350 series product, if you can buy this product as a set, the price will be very reasonale and favorable.

1, Terminals:C6350F-T and C6350M-T


2, Housing: Male housing type C6350HF-NP & C6350HF-3XNP
Female housing type C6350HM-NP & C6350HM-3XNP


3, Related drawing and report
Folllowing pictures are out testing report and exact engineering drawing for your information, please kindly check it, wish it can help you to get what you really need.


Dimension drawing

for TE 1-480699-0 alternatives 6.35mm Pitch female connector Wire To Wire Connectors

for TE 1-480699-0 alternatives 6.35mm Pitch female connector Wire To Wire Connectors
for TE 1-480699-0 alternatives 6.35mm Pitch female connector Wire To Wire Connectors


Testing report



1. Scope

This specification covers the requirements for product performance of 6.35mm pitch wire to wire

connectors series.


2. Construction,Dimensions,Material & Plating

See the attached drawings


3. Ratings & Applicable Wires


ItemStandard
Rated Voltage (Max.)600V AC/DCInsulation O.D. 3.30mm (Max.)
Rated Current (Max.) And Applicable WiresAWG#1415A AC/DC
AWG#1612A AC/DC
AWG#1810A AC/DC
AWG#208A AC/DC
Ambient Temperature Range-25℃ ~ +85℃*

*: Including terminal temperature rise


4. Electrical Performance


Test DescriptionProcedureRequirement
4-1

Contact Resistance


Mate connectors, measure by dry circuit, 20mV max., 10mA.(Based upon JIS C5402 5.4)3.50mΩ (Max.)
4-2Insulation ResistanceMate connectors, apply 500V DC between adjacent terminal or ground. (Based upon JIS C5402 5.2/MIL-STD-202 Method 302 Cond. B)1000MΩ (Min.)
4-3Dielectric Withstanding VoltageMate connectors, apply 5000V AC (rms) for 1 minute between adjacent terminal or ground. (Based upon JIS C5402 5.1/MIL-STD-202 Method 301)No Breakdown.
4-4Contact Resistance on Crimped PortionCrimp the applicable wire on to the terminal, measure by dry circuit, 20mV (Max.), 10mA.5mΩ (Max.)

5. Mechanical Performance


Test DescriptionProcedureRequirement
5-1Actuator Insertion & Withdrawal ForceInsert and withdraw connectors at the speed rate of 25±3mm / minute.Refer to paragraph 7
5-2Crimping Pull Out ForceFix the crimped terminal, apply axial pull out force on the wire at the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8)AWG#1411.0kgf (Min)
AWG#1610.0kgf (Min)
AWG#189.0kgf (Min)
AWG#206.0kgf (Min)
5-3Terminal Insertion Force.Insert the crimped terminal into the housing.2.30kgf (Max.)
5-4Terminal/Housing Retention Force.Apply axial pull out force at the speed rate of 25±3mm / minute on the terminal assembled in the housing.3.00kgf (Min.)
5-5Latch Yield Strength

Mate connectors and pull apart until both latches break at the speed rate of

25±3mm / minute

16.0kgf (Min.)
5-6Panel Mount Retention ForceInsert the housing into panel cut out, push housing opposite the way it was assembled until the locking barbs break at the speed rate of 25±3mm / minute.34.0kgf (Min.)
5-7DurabilityWhen mated up to 50 cycles repeatedly by the rate of 10 cycle per minute.Contact Resistance 7mΩ (Max.)
5-8Vibration

Amplitude: 1.5mm P-P

Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes.

(Based upon MIL-STD-202 Method 201A)

Appearance No Damage.

Contact Resistance 7mΩ (Max.)

Discontinuity 1 μsec.(Max.)

5-9Physical Shock490m/s²{50G},3 strokes in each X.Y.Z. axes. (Based upon JIS C0041/MIL-STD-202 Method 213B Cond. A)


6. Environmental Performance And Others


Test DescriptionProcedureRequirement
6-1Temperature RiseCarrying rated current load.(Based upon UL 498)30℃(Max.)
6-2Heat Resistance85±2℃,96 hours (Based upon JIS C0021/MIL-STD-202 Method 108A Cond. A)

Appearance No Damage.

Contact Resistance 7mΩ (Max.)

6-3Cold Resistance-25±3℃,96 hours (Based upon JIS C0020)
6-4Humidity

Temperature: 40±2℃

Relative Humidity : 90~95%

Duration: 96 hours

(Based upon JIS C0022/MIL-STD-202 Method 103B Cond. B)

Appearance No Damage.

Contact Resistance 7mΩ (Max.)

Insulation Resistance 100MΩ (Min.)

Dielectric Withstanding Voltage Must meet 4-3

6-5Temperature Cycling

5 cycles of:

a) -55℃ 30 minutes

b) +85℃ 30 minutes

(Based upon JIS C0025)

Appearance No Damage.

Contact Resistance 7mΩ (Max.)

6-6Salt SprayTin-plated 12 hours / Gold- plated 24 hours exposure to a salt spray from the 5±1% solution at 35±2℃. (Based upon JIS C0023/MIL-STD-202 Method 101D Cond. B)
6-7SO2 Gas

24 hours exposure to 50±5ppm.

SO2 gas at 40±2℃.

6-8NH3 Gas40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution.

7. Actuator Insertion/Withdrawal Force

[Unit : kgf]

CircuitsAt Initial
Insertion (Max.)Withdrawal (Min.)
Single0.800.23
021.600.46
032.400.69
043.200.92
054.001.15
064.801.38
086.401.84
097.202.07
129.602.76
1512.003.45


4, Why choose us

1). High Reputation: We are a professional & realiable electronics connector, wafer, termianl manufacturer with 12 years experience, who has owned high reputation in this field.


2). Famous Exhibition: We are active in attending Exhibitions, like China Sourcing Fair in HongKong. We've built up business with lots of clients from all over the world.


3). Visit us: Welcome to visit our factory facility, we will show you a competitive company with high quality & reasonable price.


Company Profile

RULETEAM CONNECTION TECHNOLOGY (SHENZHEN) CO.,LTD

12-year Experience of Manufacturing Connectors
Established in 2004, Xinpei is your reliable supplier for most of connectors. Our products are widely trusted by reputable and famouse manufacturers of household appliances, computer peripherals, medical equipment, locomotives, telecommunication device and other relative field.

Offering One-stop Sourcing Solutions for International Buyers
At our ISO 9001:2008 certified factory in Dongguan, mainland China, we make UL-listed goods by using automatic equipment for uniform product quality. By our integrated molding, mass production and assembly services are carried out by 100 skilled workers and the professional account executive can offer an one-stop sourcing solution to all international buyers.

Advanced Machines from Japan and Taiwan
We use advanced machinery from Japan and Taiwan to guarantee efficient and precise manufacturing. We have a commitment in delivering superior quality products at competitive prices.

Our advantages are as following:

  • We offer complete end-to-end customized manufacturing solutions
  • We have four mechanism engineers to refine your design for production
  • We skillfully use AutoCAD, SolidWorks and Pro/E software to design your customized project
  • Our materials are sourced from Switzerland, Japan and Taiwan
  • Reputable manufacturers like Amphenol and AOC trust and cooperate with us for many years
  • We own advanced inspection equipment like X-ray testing machine, high pressure testing machine projector, fully automatic tension meter, salt spray testing machine, insulation pressure testing machine and 3D optical image measuring testers to ensure the highest quality possible
  • We accept small quantity orders
  • Reply inquiries within eight hours
  • We have more than 15 years of experience in handling OEM and ODM orders

Contact Us Now
We are looking forward to establishing long-term business relationship with you in the near future. So please inquire to us today and receive our fast reply within eight hours.

Send your message to this supplier
*From:
Your email address is incorrect!
*To:

RULETEAM CONNECTION TECHNOLOGY (SHENZHEN) CO.,LTD

*Subject:
Your subject must be between 10-255 characters!
*Message:
Your message must be between 20-3,000 characters!
Characters Remaining : (0/3000)

You May Like

China Dual Row Female Wafer Wire To Wire Connectors 3.0mm Pitch Housing With Lock wholesale

Dual Row Female Wafer Wire To Wire Connectors 3.0mm Pitch Housing With Lock

China Phosphor Bronze 43020 Wire To Wire Connector, 3.0mm pitch Dual Row Female Power Connector wholesale

Phosphor Bronze 43020 Wire To Wire Connector, 3.0mm pitch Dual Row Female Power Connector

China 2.50mm Pitch Plug housing(for socket contact), SMR Connector Wire to Wire Connectors wholesale

2.50mm Pitch Plug housing(for socket contact), SMR Connector Wire to Wire Connectors

China Receptacle housing  Single Row Wire To Wire Connector 2.50mm Pitch SMR Connector wholesale

Receptacle housing Single Row Wire To Wire Connector 2.50mm Pitch SMR Connector

China Single Row 4.2mm Pitch Power Connector Plug Housing with Panel Mounting Ears wholesale

Single Row 4.2mm Pitch Power Connector Plug Housing with Panel Mounting Ears

China 5.08mm Pitch Female Connector  Male Crimp Housing 4 Circuits with tin-plated Brass Contact wholesale

5.08mm Pitch Female Connector Male Crimp Housing 4 Circuits with tin-plated Brass Contact

China 2.0mm Pitch Wire To Wire Connector, 2.00mm Pitch Wire-to-Wire Plug Housing, 51006 Crimp Housing wholesale

2.0mm Pitch Wire To Wire Connector, 2.00mm Pitch Wire-to-Wire Plug Housing, 51006 Crimp Housing

China Dual Row Wire To Wire Connectors Low-Halogen Molex 43025 Micro-Fit 3.0 Receptacle Housing wholesale

Dual Row Wire To Wire Connectors Low-Halogen Molex 43025 Micro-Fit 3.0 Receptacle Housing

China Dual Row Female Wafer Wire To Wire Connectors 3.0mm Pitch Housing With Lock wholesale

Dual Row Female Wafer Wire To Wire Connectors 3.0mm Pitch Housing With Lock

China Dual Row Wire To Wire Connectors Low-Halogen Molex 43025 Micro-Fit 3.0 Receptacle Housing wholesale

Dual Row Wire To Wire Connectors Low-Halogen Molex 43025 Micro-Fit 3.0 Receptacle Housing

China PCB Board Single Row Wire To Wire Connectors 4.20mm Pitch 2~5 Circuits wholesale

PCB Board Single Row Wire To Wire Connectors 4.20mm Pitch 2~5 Circuits

Inquiry Cart 0