
Power cable connectors pitch 2.54mm wire to board PA66 Housing / Terminal
Description:
1, A2540series Housing have A2540H-NP .
2, Housing used materials: PA66, Halogen Free , Fire-protection rating is UL 94-V0. Minimum packing quantity is 1000pcs/bag.
3. Terminals are stamped by Brass , E-Stamping before Tin-plated ,Tin-plated we calling A2540-TPe, , Minimum packing quantity is 20,000pcs/Reel. The daily production capacity is 300 to 400 KPCS.
4. Terminals' wire range :AWG #22--#28,insulation OD is1.70mm(Max).
Specifications:
Test Description | Procedure | Requirement |
Contact Resistance | Mate connectors, measure by dry circuit, 20mV max., 10mA.(Based upon JIS C5402 5.4) | 10mΩ (Max.) |
Insulation Resistance | Mate connectors, apply 500V DC between adjacent terminal or ground. (Based upon JIS C5402 5.2/MIL-STD-202 Method 302 Cond. B) | 1000MΩ (Min.) |
Dielectric Withstanding Voltage | Mate connectors, apply 1000V AC (rms) for 1 minute between adjacent terminal or ground. (Based upon JIS C5402 5.1/MIL-STD-202 Method 301) | No Breakdown. |
Contact Resistance on Crimped Portion | Crimp the applicable wire on to the terminal, measure by dry circuit, 20mV (Max.)., 10mA.. | 5mΩ (Max.) |
Voltage rated | 250V AC ,DC |
Current rated | 3A AC,DC |
Withstand voltage | 800VAC/minute |
Insulation resistance | 500MΩ Min |
Contact resistance | 10mΩ Max |
Operating temperature | -25°C~85°C |
Testing report
Mechanical Performance
Test Description | Procedure | Requirement | ||
5-1 | Actuator Insertion & Withdrawal Force | Insert and withdraw actuator at the speed rate of 25±3mm / minute. | Refer to paragraph 7-2 | |
5-2 | Crimping Pull Out Force | Fix the crimped terminal, apply axial pull out force on the wire at the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8) | AWG#22 | 4.0 kgf (Min.) |
AWG#24 | 3.0 kgf (Min.) | |||
AWG#26 | 2.0 kgf (Min.) | |||
AWG#28 | 1.0 kgf (Min.) | |||
5-3 | Terminal Insertion Force. | Insert the crimped terminal into the housing. | 1.50 kgf (Max.) | |
5-4 | Terminal/Housing Retention Force. | Apply axial pull out force at the speed rate of 25±3mm / minute on the terminal assembled in the housing. | 2.00 kgf (Min.) | |
5-5 | Pin Retention Force | Apply axial pull out force at the speed rate of 25±3mm / minute. | 2.00 kgf (Min.) | |
5-6 | Durability | When mated up to 50 cycles repeatedly by the rate of 10 cycle per minute. | Contact Resistance 20mΩ (Max.) | |
5-7 | Vibration | Amplitude: 1.5mm P-P Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes. (Based upon MIL-STD-202 Method 201A) | Appearance No Damage. Contact Resistance 20mΩ (Max.) Discontinuity 1 μsec.(Max.) | |
5-8 | Physical Shock | 490m/s²{50G},3 strokes in each X.Y.Z. axes. (Based upon JIS C0041/MIL-STD-202 Method 213B Cond. A) |
Crimp Specifications & Actuator Insertion/Withdrawal Force
7-1 Terminals with height, suggestion pressure width and wire and terminal's retention
Wire Diameter | Numbers | Conductor Parts(Core Wire)mm | Insulation Parts(PVC)mm | ||
Width | Height | Width | Height | ||
AWG#22 | A2540 | 1.30±0.10 | 0.70~0.85 | 1.75(Max.) | 1.60(Max.) |
AWG#24 | |||||
AWG#26 | |||||
AWG#28 |
7-2 [Unit : kgf]
Circuits | At Initial | Circuits | At Initial | ||
Insertion (Max.) | Withdrawal (Min.) | Insertion (Max.) | Withdrawal (Min.) | ||
Single | 0.60 | 0.10 | 09 | 7.00 | 2.00 |
02 | 2.00 | 0.80 | 10 | 7.00 | 2.00 |
03 | 2.50 | 0.80 | 11 | 7.50 | 2.00 |
04 | 3.00 | 1.00 | 12 | 7.50 | 2.00 |
05 | 4.00 | 1.50 | 13 | 8.00 | 2.50 |
06 | 5.00 | 1.50 | 14 | 8.00 | 2.50 |
07 | 5.50 | 1.50 | 15 | 8.50 | 2.50 |
08 | 6.50 | 1.50 |
RULETEAM CONNECTION TECHNOLOGY (SHENZHEN) CO.,LTD
12-year Experience of Manufacturing Connectors
Established in 2004, Xinpei is your reliable supplier for most of
connectors. Our products are widely trusted by reputable and
famouse manufacturers of household appliances, computer
peripherals, medical equipment, locomotives, telecommunication
device and other relative field.
Offering One-stop Sourcing Solutions for International Buyers
At our ISO 9001:2008 certified factory in Dongguan, mainland China,
we make UL-listed goods by using automatic equipment for uniform
product quality. By our integrated molding, mass production and
assembly services are carried out by 100 skilled workers and the
professional account executive can offer an one-stop sourcing
solution to all international buyers.
Advanced Machines from Japan and Taiwan
We use advanced machinery from Japan and Taiwan to guarantee
efficient and precise manufacturing. We have a commitment in
delivering superior quality products at competitive prices.
Our advantages are as following:
Contact Us Now
We are looking forward to establishing long-term business
relationship with you in the near future. So please inquire to us
today and receive our fast reply within eight hours.