
Thermosetting Spray Epoxy Polyester Powder Coating
COLORS AVAILABLE
GENERAL TYPES
Textures include sand grain, hammer, silk pattern, sand textured, marble,metallic, multi-color.
PHYSICAL PROPERTIES
CURING CONDITIONS
180 °C ~ 200 °C (work piece temperature), 10-15 minutes
AVERAGE COVERAGE
8-12 square meters / kg, thickness 60 microns (100% of the powder coating utilization rate)
PACKING
Outside carton lined with two layers of polyethylene bags, each containing 20 kg net weight.
STORAGE AND TRANSPORT
Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure.Storage products in line with the above conditions, since the date of production, effective storage period is 6 months.Over the storage period may be re-tested and the results were consistent with, can still be used.
HEALTH AND SAFETY
Coating powder is a non-toxic products, but should be avoided in the course of inhalation of dust.Proposed operators wear appropriate dust mask, glasses.If possible, try to avoid long-term skin contact with powder coating
Mechanical property | ||
Testing items | Standards and methods | Inspecting index |
Impact strength | GB/T1732-1993, AS3715 2.8 | >50kg/cm |
Bending resistance | GB/T1185-88, AS1580 402.1, ISO9227 | Pass 2-5 millimeters |
Adhesion CHECKED TEST | GB/T9286-88,2mm Cross cut, ISO2409 | Pass100/100, passes 0 levels |
Cupdrawing:Erichsen, ISO1520 | Erichsen, ISO1520 | Pass 3-7 millimeters |
Pencil hardness | GB/T6739-86, Mitsubishi | Pass H-2H |
Chemical resistance and weather resistance | ||
Salt spray test | GB/T1771-91,500 hours | The cross section of corrosion less than 2MM |
Hot and damp resistance test | GB/T17740-79(89),1000 hours | Without air bubbles, loses the light slightly |
Acid resistance | 10% CH3COOH, 240 hours | Without air bubbles, the surface without damage |
Alkali resistance | 10% NaOH, 240 hours | Without air bubbles, the surface without damage |
Heat resistance | 200degree,1 hour | The color change is lower than E=1.5 |
Solvent resistance | MEK24 hours soaked in solvent-free | Without air bubbles, the surface without damage |
Uvioresistant | QUV-313,500 hours | Gloss higher than 80% lower than the Munsell color change level |
Water tolerance of | 2 hours | No bubble, not falling, losing light |
Greentech (Tianjin) Anti-corrosion Engineering Tech Co.,Ltd
Greentech (Tianjin) Anti-corrosion Engineering Tech Co.,Ltd. was
founded in 2011, is a large-scale research and development of
powder coating and production-oriented enterprises. The mainly
product is thermosetting powder coating. The company registered
capital is 12 million RMB, currently has 120 employees, the company
office located in Huayuan industry high-tech park, the factory is
located in Xiqing district Zhangjiawo Industrial Park, the company
owns 26 production line, the annual production capacity of 24,000
tons.
The company mainly produces epoxy powder coating, epoxy polyester
powder coating, polyester powder coating, have more than 1,000
kinds of powder coating. Since the founding of the company has
always adhered to the field of powder coatings for research and
development direction, has been successfully developed and put into
production "special radiator powder", "high-end bicycles (electric
vehicles) special powder", "pipe special powder", "locomotive parts
Surface spray powder "," valve powder "and many other special
products, The sales volume are up to top ten for several years.
The company always provide customers with stable and reliable quality products, owns the ISO9001 quality, 14000 environmental management system certification. International advanced quality testing equipment, and fine processing technology formed a set of characteristics of the quality control process, good technical support and after-sales service system. "Quality is stable, consistent" has become the industry consensus on the quality of the company's products.