Thermosetting Performance Powder Coating Electrostatic Epoxy Resin Material

FBE Metal Electrostatic Spray Thermosetting Anticorrosive Powder Coating

Introduction: a thermosetting epoxy modified heavy-duty powder coatings specially designed for epoxy anti-corrosion coating steel, this product adopts imported two step method special epoxy, part functional epoxy, match up dedicated anticorrosive epoxy firming agent, unique compound design and practical by the authoritative department detection, has good reactivity, strong adhesion strength, good toughness and bending resistance, excellent chemical resistance, solvent resistance, cathodic disbonding resistance, impact resistance and other properties.

Health & Safety:

1. No hazardous ingredient.

2. No hazardous gas.

3. The inhalation of dusts should be avoided. An operator should wear an anti-dust mask and try best to avoid long time contact with the powder coatings.

4. The coatings stacked on the skin could be washed with soap.

5. Requirement of environment protection: the product doesn’t include arsenic, selenium, lead, hexavalent chromium, mercury,stibium, cadmium and other heavy non-ferrous metals and is in fully conformity with requirement of RoHS environment protection.

Feature:

1. Very good adhesion with the substrate.
2. Coating density, continuous, brightness, resistance to penetration, less funnelled
3. Coating with excellent cathodic disbonding resistance and high electrical insulation
4. Coating with high bond strength of concrete, strong bond stress.
5. Good toughness, no cracking for bending
6. Low melting temperature, high reactivity, high curing completion rate, good mechanical properties
7. Versatility, low powder consumption
8. Steel wire drawing in the powder coating can be reduced or avoided

Power Specification

Coating Specification

Carried Standard: JG 3042-1997; GB/T 25826-2010

Application Area: Can be widely used in Bridges, ports, airports, buildings, basements, high-speed rail, etc.

Applicable process: Electrostatic Coating

Notes:

1. Steel surface scale remove clean, reveal metal color; Steel surface roughness handling quality standard, appropriate for 50-70 - mm; Derusting grade level Sa2 1/2 (GB/T8923, no chloride attached on steel surface. Preheating: temperature should be controlled in 220-245 ℃.)

2. Product should be stored in ventilated, dry, indoor temperature below 27 ℃, away from heat, corrosive chemicals and chemical solvents, avoid bright light, the maximum stack height should not exceed 4 layers, avoid prolonged pressure, ensure airtight box. In case the clot and damp affects the fluidization performance.

3. As the product has high reactivity, it is recommended that storage period for 27 ℃ under 3 months for the best. Exceed shelf life, should be test its performance first.

Greentech (Tianjin) Anti-corrosion Engineering Tech Co.,Ltd. was founded in 2011, is a large-scale research and development of powder coating and production-oriented enterprises. The mainly product is thermosetting powder coating. The company registered capital is 12 million RMB, currently has 120 employees, the company office located in Huayuan industry high-tech park, the factory is located in Xiqing district Zhangjiawo Industrial Park, the company owns 26 production line, the annual production capacity of 24,000 tons.
The company mainly produces epoxy powder coating, epoxy polyester powder coating, polyester powder coating, have more than 1,000 kinds of powder coating. Since the founding of the company has always adhered to the field of powder coatings for research and development direction, has been successfully developed and put into production "special radiator powder", "high-end bicycles (electric vehicles) special powder", "pipe special powder", "locomotive parts Surface spray powder "," valve powder "and many other special products, The sales volume are up to top ten for several years.

The company always provide customers with stable and reliable quality products, owns the ISO9001 quality, 14000 environmental management system certification. International advanced quality testing equipment, and fine processing technology formed a set of characteristics of the quality control process, good technical support and after-sales service system. "Quality is stable, consistent" has become the industry consensus on the quality of the company's products.