Epoxy Resin Protective Powder Coating , Water Gas Pipeline Powder Coating

Epoxy Resin Protective Powder Coating , Water Gas Pipeline Powder Coating

3 PE anticorrosion epoxy powder coating

Introduction:

This product adopts linear phenolic epoxy resin, design and manufacture according to GB/T23257-2009. High reactivity, high crosslinking density, coating adhesion, and coating with excellent adhesion, chemical resistance character, cathodic disbonding resistance, good impact resistance.

Feature:

1. Very good adhesion with the substrate.
2. Appropriate gel time and interface performance, easy integration with the intermediate layer and solidified as a whole.
3. Protective effect in the lager temperature range, long-lasting anti-corrosion effect.
4. The coating has excellent high temperature cathodic disbonding resistance.
5. The powder area is large, the ratio of powder is high.
6. Low melting temperature, high reactivity, high curing completion rate, good mechanical performance

Power Specification

Coating Specification

Carried Standard: GB/T 23257-2009

Application Area: Oil, gas and other pipeline anticorrosion coating

Applicable process: Electrostatic Coating

Notes:

1. Steel surface should be no oil and water, surface quality should reach Sa2 1/2 level (GB/T8923), anchor pattern depth 50-90mm, clean dust and abrasive attached to the steel surface.
2. Product should be stored in ventilated, dry, Indoor temperature below 30 ℃, away from heat, corrosive chemicals and chemical solvents, avoid bright light, the maximum stack height should not exceed 4 layers, avoid prolonged pressure, ensure airtight box. In case the clot and damp affects the fluidization performance.
3. To best curing epoxy coating, best anti-corrosion, suggested preheating tube surface temperature in more than 170℃, in order to better improve the curing completion.

Greentech (Tianjin) Anti-corrosion Engineering Tech Co.,Ltd. was founded in 2011, is a large-scale research and development of powder coating and production-oriented enterprises. The mainly product is thermosetting powder coating. The company registered capital is 12 million RMB, currently has 120 employees, the company office located in Huayuan industry high-tech park, the factory is located in Xiqing district Zhangjiawo Industrial Park, the company owns 26 production line, the annual production capacity of 24,000 tons.
The company mainly produces epoxy powder coating, epoxy polyester powder coating, polyester powder coating, have more than 1,000 kinds of powder coating. Since the founding of the company has always adhered to the field of powder coatings for research and development direction, has been successfully developed and put into production "special radiator powder", "high-end bicycles (electric vehicles) special powder", "pipe special powder", "locomotive parts Surface spray powder "," valve powder "and many other special products, The sales volume are up to top ten for several years.

The company always provide customers with stable and reliable quality products, owns the ISO9001 quality, 14000 environmental management system certification. International advanced quality testing equipment, and fine processing technology formed a set of characteristics of the quality control process, good technical support and after-sales service system. "Quality is stable, consistent" has become the industry consensus on the quality of the company's products.