OEM / ODM Plain Baby Clothes Cotton Slub Jersey Sleeveless Unisex Baby Tank Tops

Yarn Production

Modernization efforts have brought major changes to the U.S. textile industry. Equipment has been

streamlined and many operations have been fully automated with computers. Machine speeds have greatly

increased. At most mills the opening of cotton bales is fully automated. Lint from several bales is mixed and

blended together to provide a uniform blend of fiber properties. To ensure that the new high-speed

automated feeding equipment performs at peak efficiency and that fiber properties are consistent,

computers group the bales for production/feeding according to fiber properties. The blended lint is blown by

air from the feeder through chutes to cleaning and carding machines that separate and align the fibers into

a thin web. Carding machines can process cotton in excess of 100 pounds per hour. The web of fibers at

the front of the card is then drawn through a funnel-shaped device called a trumpet, providing a soft, rope-

like strand called a sliver (pronounced SLY-ver). As many as eight strands of sliver are blended together in

the drawing process. Drawing speeds have increased tremendously over the past few years and now can

exceed 1,500 feet per minute. Roving frames draw or draft the slivers out even more thinly and add a gentle

twist as the first step in ring spinning of yarn. Ring spinning machines further draw the roving and add twist

making it tighter and thinner until it reaches the yarn thickness or count” needed for weaving or knitting

fabric. The yarns can be twisted many times per inch. Ring spinning frames continue to play a role in this

country, but open-end spinning, with rotors that can spin five to six times as fast as a ring spinning machine,

are becoming more widespread. In open-end spinning, yarn is produced directly from sliver. The roving

process is eliminated. Other spinning systems have also eliminated the need for roving, as well as

addressing the key limitation of both ring and open-end spinning, which is mechanical twisting. These

systems, air jet and Vortex, use compressed air currents to stabilize the yarn. By removing the mechanical

twisting methods, air jet and Vortex are faster and more productive than any other short-staple spinning

system. After spinning, the yarns are tightly wound around bobbins or tubes and are ready for fabric

forming. Ply yarns are two or more single yarns twisted together. Cord is plied yarn twisted together.

.............
Will be continued in the next chapter.

FAQ:

1. Q: Are you factory or trading company?

A: We are factory.

2. Q: Could you make as our designs?

A: Yes. We could make samples following your designs and requirement. We could do both OEM and ODM.

3. Q: What is the delivery time?

A: The production time is around 25-35 workdays after samples and payment confirmed.

4. Q: Can we make our logo on the clothes?

A: Yes. We could embroidery or print your logo. And also use your labels and hangtags.

5. Q: What about the sample fees and delivery date?

A: Our sample fee depend on your style/ material/ quantity.

B: Sample delivery date: 7-15 workdays for customize styles; 3-5 days for Wholesale styles.