High Performance Network Poe Surge Arrester , Poe Surge Suppressor Anti - Jamming

Anti-jamming High Performance Network Surge Protector Affordable

Model:Trss-rj11 / 45

colour:white

Authentication :CE ECM

Working principle of product

The working principle of network lightning arrester is to present high resistance open state with a low voltage, low resistance short circuit state at high pressure, and a combination of over voltage protection electronic devices which can withstand hundreds of amperes and large current in parallel on power supply line and signal transmission line. When encountering lightning and high voltage and high current, it will appear short circuit immediately, and at the same time, the total power switch will be disconnected, so that the computer equipment will be protected.

Product features

1. the speed of response is 0.001 seconds, and the voltage is controlled in the range that the equipment can withstand.

2. limit the precision of the voltage to say how much!

3. core components are strictly screened, stable performance and reliable operation.

4. extremely low online resistances reduce unnecessary attenuation of signal intensity and increase the distance of signal transmission to the maximum.

Product specification

Product description

The TRSS-RJ45/8 type network lightning arrester is used on the RJ45 interface of the LPZ2- LPZ3 partition interface to protect Ethernet computers, servers, switches, routers and other network devices. The network surge protector is suitable for lightning strikes or other surge protection of network devices such as SWITCH, HUB, ROUTER and computers of six types of wiring systems. It is used to protect sensitive high-speed communication network from damage caused by lightning induced voltage, power interference, electrostatic discharge and so on. The signal lightning arrester adopts the multilevel protection circuit, selects the world famous brand components and makes use of the advanced production technology. It has the characteristics of large flow capacity, low residual pressure level, sensitive reaction, stable performance, reliable work and so on.

Use of attention

1. when installing, attention should be paid to cables coming in and out of surge protective devices, so as to avoid the two coupling of surge.

2. please recognize the interface and the way of connection.

3. identify the input / output interface identifier of the lightning protector, input the external line and output the device.

4. lightning protector is between the protected device and the signal channel.

Company profile

Thor has been designing new products to meet the RoHS directive since 2006. Thor’s ongoing commitment to RoHS compliance includes continuing efforts to reduce the presence of hazardous substances in the design and manufacture of a growing number of popular products.

All types and classes of our lightning and surge arresters 20KA~200KA(8/20μS) and 15KA~50KA(10/350μS) are tested and pass all the requirements based on their class.

Thor is all about protecting against the damaging effects of power transients. It is our goal and mission to connect our customer challenges with high-quality, right-priced solutions and products – completed by unrivaled customer service and technical support.

Incorporated in 2006, Zhejiang Thor Electric Co., Ltd has built everything to offer a wide range of innovative and reliable surge protection solutions and products.

Thor is following the international quality system standards, is ISO 9001 certified and our technical standards are in line with GB18802.1-2011/IEC61643-1.

All types and classes of our lightning and surge arresters 20KA~200KA(8/20μS) and 15KA~50KA(10/350μS) are tested and pass all the requirements based on their class.

Thor has been designing new products to meet the RoHS directive since 2006. Thor’s ongoing commitment to RoHS compliance includes continuing efforts to reduce the presence of hazardous substances in the design and manufacture of a growing number of popular products.

Zhejiang Thor Electric Co., Ltd is committed to meeting the requirements of the European Union’s Waste Electrical and Electronic Equipment (WEEE) directive. This directive requires producers of electrical and electronic equipment to finance the take-back for re-use or recycling of their products placed on the EU market after 2005.