
3 Phase 3 wire Three Phase Voltage Monitoring Relay under-voltage protective device
In daily life, the loads we touch, such as electric lamps, televisions, refrigerators, fans and other household appliances and single-phase motors, are operated with two wires in the circuit, which are all single-phase loads. In the three-phase four-wire system, multiple single-phase loads should be connected as far as possible to the three-phase circuits, rather than being concentrated in one of the three circuits. If the impedance and the nature of the load connected to each of the three-phase circuits are the same, the loads in the three circuits are symmetric. Under load symmetry, because the phases of the phase currents differ from each other by 120°, the sum of the currents flowing through the neutral line at each moment is zero, and the neutral line is removed, and it is possible to supply power using a three-phase three-wire system.
However, in reality, the three-phase load formed by a plurality of
single-phase loads connected to the three-phase circuit may not be
completely symmetrical. The midline is particularly important in
this case, not dispensable. The voltage across the load of each
phase of the neutral line is always equal to the phase voltage of
the power supply and will not change due to the asymmetry of the
load and the change of the load, just as each phase of the power
supply separately supplies the load of each phase separately. Can
work properly. If there is no neutral line under the condition of
asymmetric load, three-phase three-wire power supply with
asymmetrical load is formed. Due to the asymmetry of the load
impedance, the phase current is also asymmetric and the load phase
voltage is naturally not symmetrical. Some phase voltages may
exceed the rated voltage of the load, the load may be damaged (bulb
burned), some phase voltages may be low, and the load may not work
properly (bulbs dimmed). As in the figure, the load impedance of
each phase changes due to lighting, turning off the lamp, and other
factors. Both the phase current and the phase voltage change, the
light turns on and off, and other electrical appliances cannot work
properly or even become damaged.
Bad. It can be seen that in the three-phase four-wire power supply
line, the neutral line plays a role in ensuring that the load phase
voltage is symmetrical and unchanged. For an asymmetrical
three-phase load, the neutral line cannot be removed, fuses or
switches cannot be installed on the midline, and it is necessary to
use The steel wire with better mechanical strength serves as the
center line.
♦ Features
-- Compact modular size
-- Three-phase monitoring of phase sequence, phase loss, over- and undervoltage and phase unbalance
-- Powered by the measuring circuit
-- 2 C/O contacts
-- 5 LEDs for status indication
♦ Protective Functions
-- Phase sequence
-- Phase loss
-- Overvoltage
-- Undervoltage
-- Phase unbalance
♦ Typical Applications
• Pumps • Fans
• Blowers • Motors
• Compressors
♦ Approvals
• CE • CCC
♦ Technical data
Type | JVRD-380 | ||||||||||||||||||
Measuring circuit | L1,L2,L3 | ||||||||||||||||||
Rated voltage | 220VAC,380VAC,440VAC 460VAC,480VAC,50/60Hz | ||||||||||||||||||
Monitoring functions | phase sequence,phase loss,overvoltage, undervoltage,phase unbalance | ||||||||||||||||||
Voltage setting range |
| ||||||||||||||||||
Indicators | phase sequence,phase loss,overvoltage, undervoltage and normal | ||||||||||||||||||
Output contacts | 2 C/O | ||||||||||||||||||
Contact capacity | 6A,250VAC | ||||||||||||||||||
Dimensions(H*W*D) | 79*23*79mm | ||||||||||||||||||
Mounting | DIN Rail |
Wenzhou Ginri Power Automation Co., Ltd.
GINRI POWER AUTOMATION CO.,LTD. is a professional production voltage phase sequence protection
device (and name: three-phase power monitor), and PLC output zoom
Board, and smart type motor integrated protection device, and
industrial parts manufacturers, technology development team in
elevator industry, and refrigeration industry, and crane industry,
environmental equipment, mechanical NC industry and the industrial
following insurance industry, field has more than 10 years practice
experience, has development out variety price economic and function
excellent of products. CQC product quality system by China Quality
Centre (3C) certification and CE certification, products in the
manufacturing process in strict accordance with the ISO9001 quality
assurance system requirements and professional technical and
service support.
Voltage phase-sequence protection for many years (equipment,
refrigeration equipment, crane (passenger and goods) elevators,
control of DC power supply system (Cabinet) screens, precision air
conditioners, room air conditioners, electric hoist, boiler
equipment, laser equipment, parking equipment, cranes, compressors)
and so on using the run.
PLC output amplifiers (environmental protection equipment,
numerical control and automation equipment, automobile, plastic
machinery, hydraulic machinery, ceramic foam machinery, woodworking
machinery, machinery) and so on using the run.
Years of integrated Intelligent motor protector (power plants,
paper mills, steel mills, aluminium plants, cement plants, sewage
treatment plants, coal preparation plants, refineries,
petrochemical plants), and so on using the run.
Product quality is stable and safe, reliable, and earned a solid
market position in the market and a high reputation in the
industry, received unanimous recognition and praise of our
customers.
Ginri company always adhere to "scientific management as the core,
the user needs for the Centre to focus on product quality,
meticulous service is sincere," the spirit of enterprise, please
call us from all walks of life, thank you!