Single Mode Single Fiber Media Converter 20KM 1310 / 1550NM For Network Centre

Gigabit Singlemode Single Fiber Media Converter 20KM 1310 / 1550NM for Network Centre

Product Description

The MC102 series comply with IEEE 802.3/ab Gigabit Ethernet standard. It supports two types of media for network connection such as 10/100/1000 Base-Tto 1000 Base SX/LX and connects these two types of segments to operate smoothly, MC102 series can be used in 14/16 slot chassis for centralized management.

MC102 series Fiber Media Converter transforms 1000Base-T (Copper Gigabit) media to1000Base-SX/LX (Fiber Gigabit) media and vice versa. The 1000Base-T ports up ports full-duplex Gigabit connection at wire speed with RJ45 connector. The fiber Gigabit connection supports short wave (SX) or long wave (LX) laser optic with multi-mode or single-mode SC type connector.

This converter will give your Copper Gigabit connection the ability to interface with fiber connection over a distance up to 80 km! 10/100/1000means, that media converter that converts the electrical signal of a10/100/1000 Ethernet signal from copper to fiber. This solution will offer a low-cost integration option for network managers who want to migrate from10/100 networks to Gigabit Ethernet. Gigabit only switches can now be connected to 10/100 networks without the need to upgrade the 10/100 side, allowing network managers to add new equipment gradually

Key Features:

With WDM technology, single fiber, double utilization rate of fiber optics

Single fiber media converter must be used in pairs, saying TX with1310nm, FX with 1550nm or TX with 1550nm, FX with 1310nm or 1490nm

With 1310nm/1550nm or 1310nm/1550nm or 1490/1550nm DFB single fiber optical-electronic-integration module providing stable and reliable performance

10/100/1000M auto-adaptation environment, convenient for network upgrading

With distinct HIC solution, low-temperature-rise chip, no need of cooling system, realization of flow control, decrease of broadcast storm

With famous brand optical-electronic-integration module providing excellent optical and electrical properties to ensure reliable data transmission and long working life

Supporting broadcast filtering, address auto-learning and auto-updating, and store-and-

forward operating mechanism

Supporting full-duplex flow control or half-duplex back pressure working pattern, along with Auto-negotiation

Single RJ-45 electrical port NIC/HUB, auto cross-identification, link to computer network cards or switches or HUB

Supporting the switches to choose between 10/100/1000Mbps store-and forward or 1000M straight-through transmission pattern(distinct)

Supporting 1916 byte super data packet transmission

Providing indicator lamps for link-loss, electrical and optical link diagnosing, dynamic data transmission and full/half duplex, data rate

With more than 50,000 hours MTBF, complying with telecom operating standard

Ultra low power dissipation(< 2.5W, Input:AC100 ~ 260V),low heat, long-time stable work

Technical Description:

Natywish was founded in 2006,  more than 10 years development and production experiences , our company has been concentrating on the fileds of Pon syestems and has been devoted to the R&D of relevant products solution .

Our main produce GPON/EPON OLT, ONU, advantage products also including media converter, POE switch, industrial switch. Production is base on the largest PON foundry factory in Shenzhen, which has 60000 square meters.

Natywish has become a leader and expert in security and fiber optical communication industry in China.