
10 - 20 Theoretical plate Distillation Column for CBD / THC / Hemp oil / Cannabissativa
——Particular features
Continuous distillation process.
Low operating pressures (100~10000Pa ,100Pa=1mbar).
Short residence time.
High evaporation rates.
Processing of high-boiling, high-viscosity or crystallizing
products is possible.
Can be used as a reboiler for column.
Low fouling on evaporator wall.
Type | JZ-50 |
Material | stainless steel 304/S316L |
Distillation column type | packed tower |
Theoretical plate | 10-20 |
Temperature | Room temp~200/300 ℃(depend on the oil heater) |
Column size | DN50*800-1600mm |
Reboiler | 20L~30L |
Receiver size&quantity | 10L*2 |
Condenser HTA | 0.86 (m2) |
Vacuity | MIN:0.5mbar(depend on the nature of material and vacuum pump&vacuum pump not included) |
Floor area | length*width*height=1000*800*2500-3300 (mm) |
Power | 1.1KW(without pump) |
Voltage | 220V-60HZ |
Warranty | 12 Month |
Remove the fractionation column from the Distillation Column and pack the internal space with steel wool. The steel wool increases the surface area the vapors interact with and slows the movement of the vapors up the column. The longer the vapors take to reach the top of the Distillation Column, the higher the purity of the fraction and the greater the efficiency of the column. You can use any highly porous, non-absorbent material for the column packing material.
Raise the temperature of the heat source slowly to give the fractions time to interact and complete their movement up the column and down the condenser arm. Many industrial manufacturers increase the surface area in the column to recover fractions that have a boiling point separated by less than a degree.
Wrap the Distillation Column with an insulator like aluminum foil. The insulation will allow the vapors to travel all the way to the top of the column and out the condenser. The increase in efficiency results from the repeated interaction with the column packing. The vapor condenses on the metal and drops back to the boiling pot to evaporate again.
Shanghai Dea Chemical Equipment Co., Ltd.
Shanghai Dea chemical equipment Co.,Ltd
—— We devote to design and develop the equipment of chemical separation and abstraction.
—— We came from East China University of Science and Technology, which we long-term cooperated with later. And now, we serve for many famous universities, such as Tsinghua University , Sun Yat-sen University , etc.
—— We provide equipment of distillation and extraction for the technicians in the area of chemical medicine and food industry.
—— We own senior engineers who have rich experience in chemical engineering.
—— Our products can be used in lab-scale, pilot-scale experiments and small-scale production.
—— The experimental results are more authentic by using our products thanks to the continuous operation during the course of the experiments or pilot-scale experiments.
—— We repaire imputed equipments out-of-warranty for UIC,POPE,BUCHI in the past few years, which made us accumulating rich experience.
—— Practical, quality first, service first, reputation first' is the motto that guides the work of DEA team.