Autoclave Wood Timber Preservative Treatment Pressure And Temperature Customized

CCA ACQ Tanalith Timber Preservative Treatment Pressure And Temperature Customized

Ⅰ Product description

Wood pressure treatment plant apply to wood’s corrosion protection, fire retardant, mothproof, fire prevention, insect-resistant, modification, dyeing, coking, degrease and deep processing. Wide applicability, better effect of processing, big capacity. reasonable layout, safety and reliable are the advantages of this equipment. And it also have advantages of reduce labor intensity and working cost. It completely meet the requirement of deep processing of all kinds of wood.

This timber preservative treatment plant has a wide range of use, large treat capacity, safety and reliability, and can meet the deep processing requirements of users for various types of wood. Have been sold to the Philippines, Tanzania, Kenya, Uganda, Myanmar, Russia, Thailand, South Korea, Sweden and so on.

Ⅱ Main Model

Note: The diameter and length can be customized according to users' needs. If the above model is not suitable, please tell us the diameter and length you need. We can customize it for you.

Ⅲ Technical parameters

Ⅳ Technology Process

Initial vacuum: we need to keep the tank vacuum before filling of the wood preservative. And it will make the wood preservative into wood cells better. The vacuum degree is -79.8~90kpa and the vacuum time is according to different product(normally 15-60 minutes). when the cylinder in vacuum state, a part of air in the wood was taken out, the resistance will reduce when the wood preservative pushed into wood, so the wood preservative will be easy to get into wood cell.

Filling of preservative into tank: Add the wood preservative by manual valve when the equipment in vacuum state, to make sure the air which in the same condition was stopped in the wood cells. (the degree of vacuum is up to the size of valve)

Boost pressure stage: Begin to boost pressure lowly to 1.0-1.4MPa when the preservative is full of wood tank ,then keep the pressure value until the regulation preservative into the wood.

Pressure relief and discharge preservative: Discharge the pressure after the regulation preservative is absorbed. There will be a little recoil phenomenon(5-15%) during the process.

Final vacuum: Pumping air from the tank to keep the tank vacuum after the preservative discharged from the tank. The purpose is to extract excess wood preservative to reduce the phenomenon of oil dripping.

Recover atmosphere, then open the door and take out of timbers.

ⅤOur advantages

1. Our equipment automatically controls pressure and vacuum,our equipment once reach the pressure or fixed vacuum , the pressure pump or vacuum pump will stop by itself , once lower than the fixed point, the pumps will start working by automatic control system.

For example ,the power of pressure pump is 5.5kw ,for treat one circle ,our pump only work 30-60 mins ,for other company's it will work 120-180mins .

Each day saving much production cost for the users .

2.-- The material of this machine is Q345R steel, is the special steel plate for pressure vessel, we purchase from famous Jinan steel factory.

3. -- Our company has own special flaw detection to ensure the quality of products.

4. -- Manual quick open door way, advanced open door method, only one young girl can open the door easily. Double safety device, automatic safety interlocking device and Manual safety interlocking device, it solved the safety problem of wrong operation.

5.-- Our machines are equipped with a filtration system that filters out impurities.

6. -- We have special sewage outlets to prevent the residual chemicals flowing out, will not pollute the factory floor.

7. -- Many of our valves are automatic control stainless steel valves, which are several times the price of ordinary valves.

8. -- Regardless of whether it is a vacuum pump, air compressor or pipeline, our configuration is relatively high, and the equipment is highly working efficient, which also saves costs for users.

Since 2008， Luy Machinery Equipment CO., LTD have more than 10 years experience in pressure vessel, the company covers an area of 5300m2 and has more than 200 employees. It is a modern new-type equipment manufacturing enterprise integrating design, manufacture and sales.

Our main products are wood impregnation equipment, cerosote wood treatment plant, wood heat treatment plant, rubber curing autoclave, composite autoclave, wood drying machine and ect. All equipments can be customized according to the customer's product process requirements, to the maximum satisfaction of different products technical and process requirements for the product.

We have exported to many countries, like Philippines, Uganda, Zambia, Kenya, Switzerland,Thailand, South Korea, Tanzania, Myanmar, Russia, Indonesia and ect.