Floating Yokohama Pneumatic Rubber Fender No Air Leakage Emergency Fendering

3m x 5m 50kPa Marine Pneumatic Floating Yokohama Rubber Fender

Through hard work of 2 decades, Qingdao Luhang has grown to be a leading and professional manufacturer of Yokohama Pneumatic rubber fenders, which are ideal for permanent and semi-permanent port and ship-to-ship transfers requiring minimal maintenance, so costs are kept down. Yokohama pneumatic rubber fenders are made of synthetic-cord-reinforced rubber sheets with compressed air inside at initial pressure of 50kPa (low pressure) or 80kPa (high pressure) to enable it to float on water and work as a shock absorber between two ships or between ship and a dock. Although manufactured using different techniques, both low and high pressure fenders work by the same principle.

Applications of Yokohama Pneumatic Rubber Fender

Yokohama Pneumatic Rubber Fenders are applicable for following projects including:

I. Tankers, Gas Carries and Bulk Cargo Ships;

II. Fast ferries and aluminum hulled vessels;

III. Temporary of permanent installations;

IV. Rapid response and emergency fendering;

V. As stand-off fenders to realign ships with shore facilities.

Standard Sizes and Performance of Yokohama Pneumatic Marine Fender

These 2 factors are the critical to show the performace of an air filled marine pneumatic fender. Fenders of 50kPa and 80kPa have their different performace at a compression of 60%. Below is a data table of 50kPa and 80kPa of different standard sizes.

Advantages and Features of Luhang Yokohama Pneuamtic Marine Fenders

• Easy and fast to deploy
• Very low reaction and hull pressure
• Suitable for small and large tidal ranges
• Maintains large clearance between hull and structure
• Economical solutions
• Easily deflateable to be used in different locations and to be stocked on deck of vessels
• Built as per ISO 17357-1:2014

Types and Structure of Yokohama Pneumatic Rubber Fenders

There are 2 typical pneumatic rubber fenders: net type fender and sling type fender.

Net type fender is a fender covered with a protetion net consisting of either chain, wire, or rope and usually with tyres and rubber sleeves.

Pictures of Our Yokohama Pneumatic Marine Fenders and Our Projects

Why Choose Luhang company and our pneumatic rubber fenders?

1. Luhang is the first one and professional manufacturer of pneumatic rubber fendes with more than 20 years of developing and production experience

2. Credible company to make pneumatic rubber fenders with optimzied rubber material, enough sizes and enough layers

3. ISO certificated with a number of patents on products

4. Pneumatic rubber fenders have been inspected and approved by Third-Party like CCS, BV, SGS, V-Trust etc with excellent performance of high energy absorption and low force reaction and airtightness.

5. Satisfying and timely after-sale service: In case of any quality claims during the warranty period, we will carry out the Three Guarantees for repair, replacement and compensation of faulty pneumatic rubber fenders.

Exhibitons and Customers Visits

About Us

Qingdao Luhang Marine Airbag and Fender Co., Ltd. is the leading & professional manufacturer of marine equipment: marine airbags, marine fenders (yokohama pneumatic fenders, foam filled fenders and fixed rubbers fenders), marine buoys in China, which locates in Qingdao and has been specializing in producing ship air bags and all kinds of marine fenders since 1988.

With the rapid business progress of marine airbag and fender products in the world, we have built a Group Company in 2011 getting some investment and enhanced our registered capital to US$5,000,000 (USD 5 million). We believe we company will have a better growth rate by supplying the best quality of marine airbag and fender products with the reasonable price.

Welcome friends from all over the world to our company! Looking forward to being your friend and best supplier on marine airbag and fender products!

Contact Us

Please do not hesitate to drop us a message here or send us an email for inquiry about our pneumatic fenders if you have any demand.

Mr. Novid Liu

Email: novidliu@luhanggroup.com

Mobile: 0086 186 61897329 or 139 5321 3468

WeChat: 0086 139 5321 3468

Whatsapp: 0086 139 5321 3468

Any inquiry will be responded or replied within 24 hours.

Initially established as Qingdao Luhang Marine Airbag Factory in 1988 and changed to Qingdao Luhang Marine Airbags and Fenders Co.,Ltd in 2011, Qingdao Luhang had been devoted itself to developing and manufacturing marine airbags and marine fenders for more than 2 decades.

The factory area is 56,000m² with building area of  21,000m². The company has registered capital of USD 3 million and fixed asset of USD1.2 billion. We have a full line of production equipment: rubber mixing machine, rubber roller machine, the China biggest vulcanization tanks, the biggest Press Inspection Machine, EVA foam processing machine, Foam shaping machines and SPUA spraying machine.

Through these years' development, we have full range of marine airbags and marine fenders:

Ship Launching Airbags for ship launching and docking in shipyards

Marine Salvage Airbags for salvaging sinked vessels or refloating objects from under water

Other Airbags for special usage

Pneumatic Rubber Marine Fenders for ships and docks berthing

Foam Filled Marine Fenders for ship and docks berthing

Fixed Dock Rubber Fenders for docks and wharfs

Marine Buoys

From the begginning we have been focusing on technological innovation. With a team of experienced technicans and engineers, we have developed some high tech marine products and got some petents. We have been approved as a supplier of Navy products. 

Quality is our life line. We provide service of “three guarantees” (returning, repairing and replacing) on all our products in case of any defects due to the problems of material,manufacturing, performance under conditions of normal operation and maintenance.