220V Ball Screw Drive Electric Cylinder New Design , 800 Mm Stroke 1000 Mm/S Speed

NEW DESIGN TJEN 075 SERIES

1. Where we change?

1. More interface choices(bare ,can be customized),provides more design ideas for end users

2. Modular design,Compact structure with small inertia,high rigidity and low noise

3. More flexible to to mount the electrc cylinder

2. New Internal Structure

1. We use new mould for the cylinder profile to make the cylinder with better rigidity and longer stroke.

2. We redegign the connection between the push rod and piston to shorten the piston length,so that we can simplify the processing technology and make the delivery time shorter.

3. Air holes with mufflers are added at both ends of the cylinders to reduce the energy consumption.

4. The push rods adopt self-lubricated bearing guidance,and the more uniform camber surface fitting enables the cylinder to have some lateral bearing capacity.

3. Model Selection Guidances

STEP 1 :Accuracy & environmental condition

Check the basic conditions used in the application

STEP 2: Required space

Check the available space in the application and select the installation options: linear type,parallel type or bare cylinder.

STEP 3: MAX axial force required

Check the axial force to select the servo motor and gearbox(if necessary).

STEP 4: MAX speed

Check the required speed to select the screw lead.

STEP 5: Required stroke

Select the required stroke from a list of standard stroke.If the required stroke is not listed: define the length of the available stroke at a minimum of 10 mm.Note the value of the maximum possible travel of the selected model.

STEP 6: Lateral force

Determine the lateral force of the application.The new series of cylinders are allowed to bear some lateral force.Please communicate with us if you need to bear the lateral force in your application.

STEP 7 :Motor mounting flange

Select the appropriate motor mounting flange, linear or parallel.

STEP 8: The push-rod load form

Selects the electric cylinder push-rod end for load connection.

We provide complete system including driver, motor and gearbox to match the electric cylinder!

4. Maintenance

★ Electric cylinder is refueled with lubricating grease GB7324-1994 general lithium base 3 lubricating grease when leaves factory.

★ After electric cylinder has run for 300 hours, refill the lubricating grease. Refueling frequency, per 2000hours one time as usual, it is determined on basis of the operating environment and day-to-day operational time.

★ Refueling method: open the filler hole on the shell of electric cylinder, turn the screw to find the filler hole on the screw nut and refuel lubricating grease.

★ Requirement for lubricating grease:GB7324-1994 general lithium base 3 lubricating grease.

Suzhou Tongjin Precision Industry Co., Ltd. was established in December 2002, is currently located in Suzhou High-tech Zone, Jianlin Road, No. 411, with a registered capital of 45.36 million yuan, September 2015 share reform, May 18, 2016 in the national small and medium-sized enterprise share transfer system, stock code 837453, the existing staff of more than 200 people, of which 85% of the college education, R & D personnel More than 80 people. At present, the company has a modern office and plant area of about 15,000 square metres.

The company has been awarded "National Specialised, Specialised and New Small Giant Enterprises", "2020 China's Top 100 Non-Standard Automation Integrators", "Specialised, Specialised and New Small and Medium-sized Enterprises of Jiangsu Province", "Jiangsu Intelligent Manufacturing Leader", "Jiangsu Intelligent Manufacturing Leader" and "Jiangsu Intelligent Manufacturing Leader", "Jiangsu Province Intelligent Manufacturing Leading Service Institution", "Jiangsu Province High-tech Enterprise", "Jiangsu Province Intelligent Manipulator Engineering Technology Research Centre", "Jiangsu Province Postgraduate Workstation", "Jiangsu Province Private Science and Technology Enterprise", "Suzhou Enterprise Technology Centre", "Suzhou Intelligent Servo Press Engineering Technology Research Centre". Suzhou Intelligent Servo Press Engineering Technology Research Centre", "Advanced Unit of Scientific and Technological Innovation", "Excellent Unit of Industry-University-Research Co-operation", "Gazelle Enterprise of Hi-tech Zone", "High-tech Zone speciality and special new enterprises", "East China University of Science and Technology", "Nanjing University of Aeronautics and Astronautics postgraduate training base" title, "Jiangsu Province". HV motor automation production line of the first set of projects", "Jiangsu Province, intelligent manufacturing services demonstration enterprise", "Suzhou High-tech Zone, the top ten demonstration enterprises of intelligent manufacturing", "Suzhou Quality Award" and many other honours. " and many other honours and titles. We have passed ISO9001:2015 quality management system certification, ISO14001:2015 environmental management system certification, "intellectual property rights through the standard system", "fusion of two systems management system".

Over the years, the company has been taking "green and unmanned factory" as its vision, "to the world and China" as its mission, and "innovation, enterprise, integrity and harmony" as its core values. The core values of the company are "Innovation, Progress, Integrity and Harmony". Based on the introduction of foreign high-tech automation core components, the company has invested heavily in research and development funds, mainly for new energy vehicles, photovoltaic, 5G, energy storage batteries and other industries, intelligent servo assembly technology needs, has been successful independent research and development, design, assembly, sales of Tong Jin brand servo-electric cylinders, intelligent servo press fitting machine, the seventh-axis robots, truss robots (heavy-duty) and other proprietary products, combined with the six-joint robot to achieve the automation, safety, unmanned Automation, safety, unmanned intelligent assembly green unmanned production line, to provide one-stop factory intelligent assembly automation system overall solution, to achieve industry 4.0. at the same time, to provide customers with high-end trade brand industrial control core components: Italy Gambini rack and pinion, Panasonic servo system, Rexroth frequency converter, Nidec reducer, APEX APEX reducer.

In recent years, Tongjin has been focusing on R & D investment, increase the introduction of talent and their own training, the company has applied for more than 200 patents, has been authorised 108, of which 40 patents of invention, design patents 1, 67 utility model patents, has obtained 14 software copyrights, 4 software products, 5 high-tech products in Jiangsu Province, 5 valid trademarks registered, and applied for 3 international PCT special.