
Quick details:
Compact speed monitor M12
Cable
Sensing range 5 mm
flush mountable
Technical specification:
The KJT EX34H35 series Variable Reluctance Speed (VRS) sensors consist of an iron core, an inductive coil and a permanent magnet. A ferrous pole wheel passing the sensor face changes the magnetic field strength, resulting in an AC Voltage being induced in the coil. The frequency of the output signal is proportional to the speed of the moving target. The amplitude of the signal depends on speed, air gap, geometry of the target, magnetic properties of the target material and the electrical load. VRS sensors, also known as passive or electromagnetic sensors, do not require an external supply.
The EX34H35 is specifically designed for use in explosive atmospheres.
Features:
Signal Output: the signal frequency is proportional to the target speed
Thread Length: 3.5" 3/4"-20 UNEF-2A thread
0-20 kHz Frequency Range
Housing: 3/4"-20 UNEF-2A, tightening torque: max. 40 Nm
Connection: 10' Cable for explosion applications
Coil Inductance: 170 mH +/-10% at 1 kHz
Coil Resistance: 2950 Ohm +/-10%
Coil Magnet Polarity: South pole towards front face
Operating Temperature: -104-257°F (-40-125°C)
Protection: IP68 (Sensor) / IP67 (Cable)
Insulation: housing and electronics galvanically isolated (Test: 500V, 50 Hz for 1 minute)
Additional Information:
Manufacturer | KJTDQ |
Model Number | EX34H35 |
Sensor Type | VRS Sensors |
Supply Voltage | N/A |
Mounting Thread | 3/4-20 UNEF-2A |
Thread Length | 2.5"-3.5" |
Termination | Leads |
Additional SKUs | No |
Nanjing KJT Electric Co.,ltd
Founded in 2009, Nanjing KJT Electric Co,.LTD is a professional
manufacturer in the field of sensors and industrial switches.
Our main products are proximity sensor, photoelectric sensor,speed
sensor,and wireless sensor so on.
As a professional manufacturer, with over 10 years experience in
this field,
KJT owns an outstanding R&D team who dedicate themselves to the
development and innovation of sensors’ technology.
Our team is a mixed team,experienced and innovative.
The standard sensors are designed by our experienced engineers,and
the innovative solutions are thought by our new blood.
So we could satisfy your requirements for high quality and innovative design.
Therefore,we are sure that our products can meet the exact demands of different industries and sectors efficiently. Our high-tech products are widely used in a variety of industrial mechanical equipment and automatic assembly lines,for example,the industry of transportation, plastic, metallurgy, chemistry, textile, tobacco, food processing, printing etc. for properties of location check, signal transmission, automatic counting and velocimetry.
Also the service of OEM and free sample could be provided according to your requirements.