RAL Pantone Colorful Thermosetting Metallic Powder Coating For Metal Furniture

RAL Pantone Colorful High Qualtiy Thermosetting metallic powder coating

Characteristic:

1)Excellent Decorative Appearance

2)Good Leveling Property

3)Strong Stickiness

4)Nice Mechanical and Anti-corruption Property

Applications:

1)Metal Furniture

2) Home Appliances

3)Instrument Shell

4) Outdoor Lighting

5)Aluminum Ceiling

6) File Cabinet, Office Furniture

Main Technical Specifications:

Painting Process

Substrate Requirement :Remove the oil & rust and apply to the phosphate /chromates treatment.

Spraying Device : Electrostatic Spray Gun

Spray Gun Voltage: 60-80KV

Powder Supply Pressure:0.05-0.1MP

Spraying Rate: 100-200g/min

Spraying Distance: 150-300mm

Curing Temperature: 180-200℃ ( The temperature of working surface)

Curing Time: 10-15min

Coating Thickness: 70-90 um

Packaging

1.Carton lined with PE bag

2.Net weight 25kg per carton

3.Carton size:37.8cm*27.1cm*36.3cm

4.A 20ft container could load 15tons

Storage Condition

Temperature: ≤35℃

Humidity Conditions: Dry, Cool and Ventilated

Storing Requirement: Cannot be piled up over 4 cartons;

Seal the PE bag after using;

Away from VOC, fire and heat;

Validity: 6 months (If the parameters are tested to be qualified, the product still can be used expire date)

Cautions

1) To guarantee the coating ratio, the whole powder coating system (Spray gun, HV Control Cabinet, powder coating booth and conveyance chain) must has good grounding property. The ground wire should bury into the wet earth to conduct the static away, which could avoid poor absorption and coalescence of the metal powder cause by electrostatic shielding

2) The static gun should be overall cleaned up and the wash the conductive needle by alcohol every week so as to guarantee there will be stable high voltage on nozzle.

3) The recycled powder should be used with new powder after sifting. The automatic recycle system has auto adding device, which should be checked regularly.

4) The temperature of the oven should be examined periodically to guarantee the curing of the coating so as to achieve the best mechanical property.

Coating Cleaning Methods

1)To use wet sponge or soft towel to remove the dust from substrate so as to avoid any scratch causes by dust.

2) To put detergent into warm water, then clean dust and other dirt by towel with diluted detergent. Please do not use strong solvent and solvent with abrasive cleaner.

3) To wash the substrate with clean water so as to remove the residual detergent.

If there is grease or adhesive on the substrate, organic solve is needed for the cleaning. The following organic solvent can be selected for cleaning: ethanol, turpentine, and isopropyl alcohol

Safety and Health

This powder coating is non-toxic and conforms to ROHS standard. But worker should wear dust respirator & goggles to avoid inhaling excess dust and also avoid long-term exposure to powder coating during process.

Greentech (Tianjin) Anti-corrosion Engineering Tech Co.,Ltd. was founded in 2011, is a large-scale research and development of powder coating and production-oriented enterprises. The mainly product is thermosetting powder coating. The company registered capital is 12 million RMB, currently has 120 employees, the company office located in Huayuan industry high-tech park, the factory is located in Xiqing district Zhangjiawo Industrial Park, the company owns 26 production line, the annual production capacity of 24,000 tons.
The company mainly produces epoxy powder coating, epoxy polyester powder coating, polyester powder coating, have more than 1,000 kinds of powder coating. Since the founding of the company has always adhered to the field of powder coatings for research and development direction, has been successfully developed and put into production "special radiator powder", "high-end bicycles (electric vehicles) special powder", "pipe special powder", "locomotive parts Surface spray powder "," valve powder "and many other special products, The sales volume are up to top ten for several years.

The company always provide customers with stable and reliable quality products, owns the ISO9001 quality, 14000 environmental management system certification. International advanced quality testing equipment, and fine processing technology formed a set of characteristics of the quality control process, good technical support and after-sales service system. "Quality is stable, consistent" has become the industry consensus on the quality of the company's products.