
500 - 1500 ml / h Molecular Distillation Equipment for CBD / THC / Hemp oi l/ Cannabissativa
—— Operation
Feed liquid is admitted into still under high vacuum, immediately spread into a very thin film and forced quickly down the evaporation surface. Heated walls and high vacuum drive the more volatile components (distillate) to the external condenser as the less volatile components (residue) continue down the cylinder. The resulting fractions, thus separated, exit through individual discharge outlets. Depending on application, the desired product is either the distillate or the residue fraction. Small amounts of condensable low MW compounds collect in cold trap upstream of vacuum system. For high solvent loads, an optional external condenser may be installed immediately downstream of the still.
Different from the traditional wiped film evaporator design, the condenser is located inside the Molecular Distillation Equipment. There is no vapour line between evaporator and condenser. The considerably lower pressure in the Molecular Distillation Equipment is obtained by the short distance for the vapours on their way from the evaporator surface to the condenser. In addition, the cross section area of flow is equal to the evaporator surface, so that there is only a minor pressure drop between evaporator and condenser. The special design of Molecular Distillation Equipment allows operating pressures, also on industrial scale distillation systems, down to 0.001 mbar. The very low operating pressures ensure very low distillation temperatures and therefore a very gentle distillation is possible. The short path distillation allows the thermal separation of high molecular and high-boiling products at high yields and good product quality.
If the distance between evaporator and condenser is in the order of the average free path length of the molecules, this process is also called "molecular distillation".
TYPE | DZL-5G |
MATERIAL | High borosilicate glass & stainless steel 316 |
TEMPERATURE | Room temp~200 ℃ |
DIAMETER | 80 (mm) |
HEAT EXCHANGER HTA | 0.058 (m2) |
INNER CONDENSING HTA | 0.065 (m2) |
FEED AMOUNT | 500~1500 ( ml/h) |
ROTATION SPEED | 80-390rpm |
FILM SYSTEM | Wiped Filming System |
VACUITY | 0.001mbar(depend on the nature of material and vacuum pump) |
COLD TRAP | Liquid nitrogen/ stainless steel 304 |
FLOOR AREA | length*width*height=1100*500*1750 (mm)(without pump) |
POWER | 2KW (without pump) |
VOLTAGE | 220V /60HZ |
Shanghai Dea Chemical Equipment Co., Ltd.
Shanghai Dea chemical equipment Co.,Ltd
—— We devote to design and develop the equipment of chemical separation and abstraction.
—— We came from East China University of Science and Technology, which we long-term cooperated with later. And now, we serve for many famous universities, such as Tsinghua University , Sun Yat-sen University , etc.
—— We provide equipment of distillation and extraction for the technicians in the area of chemical medicine and food industry.
—— We own senior engineers who have rich experience in chemical engineering.
—— Our products can be used in lab-scale, pilot-scale experiments and small-scale production.
—— The experimental results are more authentic by using our products thanks to the continuous operation during the course of the experiments or pilot-scale experiments.
—— We repaire imputed equipments out-of-warranty for UIC,POPE,BUCHI in the past few years, which made us accumulating rich experience.
—— Practical, quality first, service first, reputation first' is the motto that guides the work of DEA team.