DC24V PLC SCR Module Output Amplified Module PLC PNP NPN Control Board

DC24V PLC SCR Module , Output Amplified Module PLC PNP NPN Control Board

The solid state relay is actually a PLC amplifying board. The internal principle is exactly the same. The AC solid state relay is a photocouple-driven two-way thyristor to convert voltage and current. The advantage of the solid state relay is that there is no mechanical contact and it is a semiconductor. On-off, the reaction speed is more than 5 times mechanical contact relay, the only is the volume is too large, the installation is not convenient, but also additional heat sink.

The thyristor amplifying board can directly replace the AC solid state relay, which is the same as the principle of the solid state relay. Compared with the solid state relay, the advantages of the two-band heat dissipation, easy installation, rail mounting, no drilling so porous, a SCR Magnification board can do 20 ways from 2 way, the installation is very convenient, the bad can still be repaired, the solid state relay is a one-time, the bad can't be repaired, increase the cost greatly, another advantage saves space, it is the solid state relay One-third position takes up space. Maintenance is more convenient to have output indicator, can watch the board is not normal operation, thyristor amplifying board can directly control the heating, electromagnet, lamp, hydraulic station, AC motor, electric drill and other loads.

Thyristor amplifier board, also known as thyristor amplifier board, is the same as a guillotine knife. It controls the on and off of the electricity and controls the AC power. Therefore, it is also known as the PLC AC amplifier board because it has no mechanical contacts, also known as solid state relays. Magnifying board

Thyristor output circuit

Bidirectional thyristor output circuit can only drive AC load, the response speed is faster than the relay output circuit, and the service life is longer.

The drive capability of the triac output is smaller than that of the relay output. The allowable load voltage is generally AC85 to 242V; the single-point output current is 0.2A to 0.5A. When multiple points share the common terminal, the output current at each point should be reduced. (If the triac output has a 0.3A single-point drive capability, the maximum allowable output is 0.8A/4 at 4 points common.)

In order to protect the thyristor, RC resistance absorption element (usually about 0.015uF/22Ω) and varistor are usually connected at both ends of the thyristor of the PLC internal circuit. Therefore, when the thyristor is turned off, the output of the PLC still has 1 to 2mA. Open-circuit leakage currents, which may cause some small relays to fail when the PLC output is OFF.

♦ Features

-- Standard DIN rain mounted

-- Status indication for each input

-- Special circuit for self test, overload, short-circuit and anti-interference

-- High quality SCR components with low on-resistance and excellent stability

♦ Typical Applications

• Micro-controller • PLC control • Servo System

• Electro-magnetic valve • DC Motors

• Home intelligent control

GINRI POWER AUTOMATION CO.,LTD. is a professional production voltage phase sequence protection device (and name: three-phase power monitor), and PLC output zoom Board, and smart type motor integrated protection device, and industrial parts manufacturers, technology development team in elevator industry, and refrigeration industry, and crane industry, environmental equipment, mechanical NC industry and the industrial following insurance industry, field has more than 10 years practice experience, has development out variety price economic and function excellent of products. CQC product quality system by China Quality Centre (3C) certification and CE certification, products in the manufacturing process in strict accordance with the ISO9001 quality assurance system requirements and professional technical and service support.

Voltage phase-sequence protection for many years (equipment, refrigeration equipment, crane (passenger and goods) elevators, control of DC power supply system (Cabinet) screens, precision air conditioners, room air conditioners, electric hoist, boiler equipment, laser equipment, parking equipment, cranes, compressors) and so on using the run.

PLC output amplifiers (environmental protection equipment, numerical control and automation equipment, automobile, plastic machinery, hydraulic machinery, ceramic foam machinery, woodworking machinery, machinery) and so on using the run.

Years of integrated Intelligent motor protector (power plants, paper mills, steel mills, aluminium plants, cement plants, sewage treatment plants, coal preparation plants, refineries, petrochemical plants), and so on using the run.

Product quality is stable and safe, reliable, and earned a solid market position in the market and a high reputation in the industry, received unanimous recognition and praise of our customers.

Ginri company always adhere to "scientific management as the core, the user needs for the Centre to focus on product quality, meticulous service is sincere," the spirit of enterprise, please call us from all walks of life, thank you!